D-G FUEL DISPENSER

D-G FUEL DISPENSER

Pump Type: Optional

Inlet Pressure : >=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m): 6(verticalmente) / 50(orizzontalmente)

FlowMeter Type: Optional

Accuracy : ±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition: -40~~+55degree

Control Type : Solenold Vale Control Type

Preset: Function Provided(Small LCDIndicator)

Display(Counter): Type LCD and Bright Backlight

Digit of Volume: 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range: 0~~99,999,999,99

Optional Display: Type LCD and Bright Backlight

Digit of Volume: 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount: 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose: 4.5m

Weight : 205kg.

Dimension(L×W×H): 900*620*2180(mm)

Dimension(L×W×H)Of Qty of Container: 40ft: 45 20ft: 22

wing measuring requirements: Instrument of measurement should have a certain tension and not easily be deformed so as to affect the inner cubage volume. Foam and vapor that dissolved in fuel measured are able to be discharged completely when pouring into instrument of measurement. Liquid measured should be discharged after measurement, only a bit being left in container. Valve of instrument of measurement should have reliable sealability without leakage phenomenon as being full of oil. Indicating pipe on measurer should be made of fuel dispenser glass without defect on inner diameter so as to hinder observation. Connection between measuring neck and scale should be f fuel dispenser ixed in order to keep stably relative position. The line on indicating glass should be legible and clear, width being no more than 0.25mm. The inner of measuring neck is depended upon measurer’s accuracy. As for Class II metal standard measurer, the ratio of corresponding liquid volume of per millimeter to measurable volume of measurer is no more than 5×10�. Discharge time of measurer relies on the diameter of bottom valve. It is leaned from experiment that the longer time of unload the less residual liquid left, better promoting measurement accuracy, and vice versa. Thereby, in order to control the tolerance occurred by discharge velocity and time and residual volume during approval progress, discharge condition and pouring-out time is regulated generally that opening fully bottom valve start to count two minutes from liquid dropping, then close bottom valve; or fully open bottom valve and close it after 3 minutes. Indicated value generally read out as showed at the bottom of curve in indicating glass. Apart from standard measurer applied in fuel dispenser inspection and approval, there is thermometer or temperature sensor, measured range �0�to �0� minimum value 0.2� which used to measure temperatures of liquid that passed over nozzle vent and in standard measurer. One of purpose to measure temperature is to make modification of fuel dispenser

status　　 c. EPS provides the Eft Receipt to be printed (if required no PIN on it).　　August 2002 IFSF STANDARD FORECOURT PROTOCOL FP319_1.00　　 EPS POS INTERFACE SPECIFICATION　　Page 30 of 146　　8. If EPS gets into an exception status transaction not possible to complete the transaction　　 gives a negative response.　　9. If POS fails to receive a response from EPS (EPS failure) it is up to an exception procedure　 fuel dispenser 　 to understand if PIN change was successful or not.　　10. If EPS tells POS the PIN change response but POS has failed fuel dispenser (e.g. fails to get the　　 acknowledge) it is up to an exception procedure to understand if PIN change was successful　　 or not.　　11. If completed EPS tells POS the PIN change result (positive or negative).　　12. POS is back to normal sale status.　　3.9 Part A - use case: loyalty awarding　　Loyalty awarding can work the same regardless the method of payment: it requires EPS activity even if the　　purchase is paid e.g. by cash.　　It is not possible to combine redemption and awarding.　　It is not possible to combine different loyalty cards.　　Loyalty awarding can be performed off-line by the site system (EPS application) or on-line by a central　　loyalty authorisation centre. Points are awarded upon a purchase that might be paid by card by other means　　or even split in different methods of payment.　　The on-line messages allow a combined payment by card and loyalty awarding provided that the awarding　　is on the purchase paid by card; the loyalty only messages are possible but in that scenario the loyalty　　awarding might even be performed off-line. If the loyalty awarding is on-line or off-line it is not relevant for the　　interface it is relevant only to the EPS application; the off-line transaction deliver to the central loyalty　　system is out of scope for this specification. fuel dispenser

igh-technology and creative businesses. Such businesses need talented people—and the widening ethnic and religious gap is encouraging a brain drain, says Azmi Sharom, a law lecturer at the University of Malaya. Although a national discussion is plainly needed on how to renew Malaysia s social contract and stop its races growing further apart, Mr Badawi has so far tried to close down this debate. He rejected proposals to create an “inter-faith council�and has told Article 11, a group named after the constitutional clause guarantee fuel dispenser ing religious freedom, to stop organising public discussions. Malik Imtiaz Sarwar, a Muslim lawyer and leader of Article 11, fuel dispenser says that UMNO leaders feel compelled to emit fiery religious rhetoric to outflank PAS, an Islamist opposition party. Mohamed Jawhar Hassan, the head of ISIS, a think-tank, says that Malays desire for more overt expression of their Islamic faith, and Chinese and Indian parents desire to educate their children separately, are “social forces, much more powerful than any government� Passing laws may not be enough to stem the drifting apart of the races. But there are few other ideas on how to preserve social harmony and prosperity, two huge achievements of which any country turning 50 could be proud. © 2006 .  About sponsorship The oil-for-food scandal Australians Who Bribe Nov 30th 2006 | SYDNEY From The Economist print edition Sanctions busting? The government is shocked, shocked WHEN AWB, the company responsible for selling Australia s wheat, was accused last year of having paid illegal kickbacks to Saddam Hussein s regime in Iraq, Australia s conservative coalition government, led by John Howard, was embarrassed. The prime minister likes to trumpet Australia s credentials as a free and fair trader, especially over agriculture. Moreover, he was one of the first leaders to commit troops to the American-led invasion of Iraq in 2003. fuel dispenser