S-G22 FUEL DISPENSER

S-G22 FUEL DISPENSER

Pump Type: Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type :Optional

Accuracy :±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer :1~~9,999,999

Hose: 4.5m

Weight :247kg.

Dimension(L×W×H) : 1160*560*2215(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 27

but also container, vacuum pump. The hose made according to GB10543 consists of inner rubber layer, enhancing layer, conductible metal line and exterior rubber layer. Whichever hose abided by the requirements of GB/T9081-2001 Fuel dispenser for vehicle and JJG443-98 Fuel Dispenser in terms of safety and accuracy. During operation pay much attention to protect hose: avoid as much crook as possible; prevent pressure on hose; avoid and reduce abrasion with ground. 4. Connection and seal about pipeline and hydraulic elements Each part of fuel dispenser adopts pipeline connection, dividing into hard type and soft type. In hard type connection steel pipe, brass pipe and aluminum pipe are adopted as pipeline, but in soft type one hose and corrugated pipe. Connected components includes relative elbow jointer, flange and directive jointer. There are following seal types: cone-shaped seal, subulate thread seal, O-ring seal, rubber and asbestos gasket, cork and rubber board, engineering rubber board. According to regulation stipulated in GB/T9081 every fuel dispenser should be conducted sealability testing before leaving factory, no leakage found under normal operation. As replace some parts or found leakage these problems should be paid attention: Cone-shaped seal structure Cone-shaped seal structure also called as expanding jointer, which is composed of pipe with outstretched end, flat spout and outside thread bushing. Sealability is ensured through tightly integration of subulate surfaces. In disassembli fuel dispenser ng or reassembling cone-shaped seal structure pays much attention not to hurt or broken sublatae surfaces, cleaning waste. Thread airproof As disconnection or reassembly thread surface should be kept clean, daubing seal glue or seal belt before fuel dispenser installation. O-ring seal Most manufacturer fuel dispenser s adopts national standard to design O-ring seal, reaching a good sealability. However, some parts is impossible to adopt national standards because of specific structure. Thus, user should purchase or employ appropri

ttee for Standardization;　　 IEC: International Electrotechnical Commission; OIML: International　　 Organization of Legal Metrology; CENELEC: European Committee for　　 Electrotechnical Standardization; WELMEC: European Cooperation in　　 Legal Metrology.　　 43　　PB　　Die Abteilungen　　 Alle Abteilungsleiterberichte finden sich sowohl auf Deutsch als auch auf Englisch im Web-　　 Jahresbericht auf den Internetseiten der PTB (www.ptb.de) unter der Rubrik Publikationen .　　 All reports of the heads of Divisions (in German and English) can be found in the Annual　　 Report on the web on the PTB s Internet pages (www.ptb.de) under Publications .　　 46　　 Reports from the Divisions　　Mechanics　　and　　Acoustics　　 Division　　 1　　 47　　Mechanics a tion between the 1 kg silicon spheres used　　With effect from August 1 2003 Division 1:　　 and the mass standards made of platinum-　　Mechanics and Acoustics presents itself with　　 iridium or stainless steel. The uncertainty was　　the seven departments 1.1 Mass fuel dispenser 1.2 Solid　　 reduced by more than a factor 5 compared to　　Mechanics 1.3 Kinematics 1.4 Gas Flow 1.5　　 the conventional method for calculating fuel dispenser the　　Liquid Flow 1.6 Sound and 1.7 Applied A fuel dispenser cous-　　 air density from temperature air pressure air　　tics. Besides the SI base unit of mass deriv

see map). Many are too cramped for hunting and farming and are hemmed in by pushy neighbours. In Krukutu, hardly the most claustrophobic, smallholders have driven away the animals, claims Mr Jekupé. Hence the land wars. Last month 500 Indians invaded eight farms in the north-eastern state of Bahia, which they claim occupy traditional lands. Federal police injured 12 Indians while uprooting two villages from a eucalyptus forest operated by Aracruz, a paper company. The Conselho Indigenista Missionário, a church-linked group, says 38 Indians were murdered in 2005, a ten-year high. Half died fighting among themselves, said Mr Gomes. Funai still wants to create more reserves, but the courts are starting to object. Last year the president of the Supreme Court suspended a reserve at Marangatu, in the west, leading to the expulsion of 700 Guaranis. It was only the second time that a court challenged a reserve ratified by the government. A draft law would give the Senate a veto over new reserves, which would doom most claims to ancestral lands. The Guaranis of Krukutu may be luckier. With a neighbouring Indian village they are entitled to 9,000 hectares, according to a report commissioned by Funai. Thanks to the fuss about the ring road, they may get a bit of that. © 2006 . Canadian business icons A foreign invasion Feb 2nd 2006 | OTTAWA From The Economist print edition But globe-shopping Canadians are relaxed NO INSTITUTION is more synonymous fuel dispenser with the history of Canada than the Company of Adventurers of England Trading into Hudson Bay, a charter company founded in 1670. The Hudson s Bay Company—“The Bay�to Canadians—mutated from British empire-builder into the country s largest non fuel dispenser -food retailer. Yet when on January 26th its man fuel dispenser agement agreed to a takeover by Jerry Zucker, an American investor, there was barely a whisper of protest. Even the Council of Canadians, which not too long ago would have delivered a rousing nationalistic